LUMINOUS ICON 1600 Icon 1600 with 36 Months Warranty Pure Sine Wave Inverter

Specifications

Efficiency

80 %

Output Frequency

50 hz

Output Power

1176 W

Change Over Time

20 ms

VA Rating

1400 VA

Noise Level

Noiseless

Input Voltage

12

Input Frequency

50 hz

Sales Package

1 ICON 1600 INVERTER

Model Number

Icon 1600

Battery Included

No

Back Up Time

5 hrs

Load Options

1176

Type

Pure Sine Wave Inverter

Fixture Type

Floor-Mounted, Tower Type

Technology Used

SINE WAVE

Solar Power Compatible

No

Width x Height x Depth

76.5 cm x 24.6 cm x 50.5 cm

Weight

16.8 kg

Display Type

LED

Generic Name

Inverters

Output Voltage

Eco Mode 85V - 290V (Wide range), UPS Mode 180V - 265V (Narrow range)

Mode Type

Eco Mode Voltage Operation 85 - 290 VAC, UPS Mode Voltage Operation 180 - 265 VAC

Display Indicator Functions

Normal Condition: Indicated by a Green light. User Attention Needed/Fault Condition: Indicated by a Red light.

Audible Indicator Functions

Power Cut (Switchover from Mains to Battery): A single, short beep or a momentary beep when the power goes out and the inverter takes over the load., Mains Return: A momentary beep when the main power supply is restored and the inverter switches back to charging mode. Overload Warning: A rapid or continuous beeping sound indicates that the connected load exceeds the inverter's maximum capacity (1176 Watts). The user should reduce the load immediately to prevent the inverter from shutting down automatically. Low Battery Warning: A repeating beep (often slower than the overload beep) sounds when the battery charge level is critically low, indicating that the system is about to shut down to protect the battery from deep discharge. Short Circuit/System Fault: A continuous, steady alarm or a very rapid beeping pattern often indicates a serious system error or short circuit, requiring immediate attention and potentially a call to customer service.

Protection Against

Short Circuit Protection: The unit features a Mains MCB (Miniature Circuit Breaker) to protect the inverter in case of a short circuit at the output. This breaker trips to safely interrupt the circuit when excessive current flows due to a fault. Overload Protection: The inverter is designed with an "Intelli pure sine wave" technology that includes "Smart Overload Sense". While a direct "overload protection" MCB isn't specified in all snippets, the system will detect an overload condition (when the connected load exceeds its 1176 W capacity) and typically indicate this via LED lights, potentially shutting down safely. Safety Against Electric Shock: The physical design emphasizes safety. It has a shock-proof design and uses a dedicated, integrated enclosure that hides all battery terminals and connections, meaning there are no open wires, which is particularly safe for children and pets.